The Unspecified Ones

I have discovered that the Unspecified Ones responsible for the current traffic chaos are working on a Flood Alleviation Scheme which is sorely needed in Leamington Spa. The river Leam is about 200 metres away and has got very close to Anne's house several times recently. It has flooded seriously here about four times in the last few years. Not that that makes me feel any better about the traffic.

I have been working on the Pioneer and thinking about it. Wendy Morris is right about thin threads. Even with a 2/10 cotton, the threads jump out of their heddles so I have to check before every weft throw. And the warp needs to be kept at very high tension to keep most of the threads from jumping out. I actually had a broken thread in the warp due to the tension, never before in my experience.

The first conclusion is that a thicker thread should be used. I am not a great fan of 2/6 cotton but maybe I have to use that. 2/20 cotton is my style currently. My original idea was to use the loom with its ability to resley as a kind of limited fan reed, that is, just in one section of the warp. Certainly I would not want to rethread as I think it would be difficult to get right. When I post a photo of the loom, you will see that there is a forest of half heddles present and it is difficult to work what is going on. I speak from the experience of correcting two threading errors.

The problem that I see with resleying on the hoof is that changes would have to be made every 2 to 4 weft throws. In order to make changes, I would have to slack off the tension enough to move the threads around the reed, taking care not to let the threads jump out of the heddles at the same time. The more I think about it, the more I think that the only good solution is to have the threads I want to move loose, that is not tied to the back beam, and separately weighted. In which case, I would just have to lift up that thread enough to move it in the reed. Of course, taking care not to let the thread jump out of the heddle. 

So I have to cut off the current warp and replace with a 2/6 warp where some threads are weighted separately. The back beam is going to be a mess of film canisters. 

My original intention was to weave a piece of fabric on the Pioneer for entry into the Complex Weavers Exhibition for 2014 but I have abandoned that. Early this morning I was in favour of abandoning the loom too but no, I think I will try again. Nothing like actually using a piece of equipment to find its limitations! 

In any case, I have just realised that I need to warp up the Voyager pronto to a) take to demonstrate at the Guild Exhibition next Friday, b) let the students use the week after when I run a course on double weave. The students could be just using a 4 shaft loom and I intend to warp up a warp and weft interchange draft for them all to have a go on. YSo the Pioneer will have to wait. And unless I have an inspiration very quickly, I will not be entering anything for Complex Weavers. The closing date is November 18th.

On the other hand, the Convergence yardage entry 'Ebb and Flow' is not due until January 2014 and I have already decided what to do. The draft is ready and it uses the silk warp already on the Megado. I just have to finish off the yardage for my waistcoat first. 

Leamington Spa is not my favourite place

Not at the moment anyway. For the last six months they (unspecified who) have been digging up a main road just along from my daughter, Anne, in Leamington Spa and have had a major cross roads blocked. Yesterday I came over to look after Alex and Madi for the weekend while parents go to Venice. The unspecified ones chose to move on a bit today and have blocked off two additional major junctions which are close to the first one. The result is gridlock in the city and it takes a lot of extra time to get anywhere. Since I only have two functions here, taxi cab and food provider, I am a wreck. Anyway it is worse than that.

Yesterday was crisis evening. I arrived to find that Anne and Derek's flight had been cancelled by British Airways and they spent a frantic hour trying to get on another flight so instead of a civilised departure from Ruth at Heathrow, they were leaving Stansted at 0630 hours. I have had a call from them -- in Saint Mark's Square outside Florians to say they were happy.

Which was more than I was. I taxied Alex to swimming on Thursday evening and the Saab Dashboard had a weird symbol. On consulting the manual, it means Engine fault- see to it at once. I drove home very carefully. This morning I set out for a garage which was a saga in itself but eventually managed to get it looked at, diagnosed and repaired. So now I am somewhat poorer but definitely happier.

Somehow I have managed to warp up the Pioneer which is a saga to itself and is definitely weird. I have no means of transferring photos with me but will post some as soon as I get home. There are a lot of pluses in the process. Basically you warp up directly on to the loom and you can do this for warps of several yards. I have put on 1.5 metres of 2/10 cotton. Wendy Morris told me that 24 to the inch was as much as you could use without threads jumping out of their slots. My sample is only six inches wide and I have woven a few inches. I will start playing with it tomorrow.

This is just to cheer me up. Two icecreams at Florians in April 2013. One for Debbie and one for me.

 

Posted with Blogsy

People - and Things

Last weekend I was at Steeple Ashton where Wiltshire Guild has its HQ. I was there to teach Woven Shibori. It all went with only one hitch. I had forgotten there was an error in one of the drafts and one poor weaver thought she had something looking very odd and it did. The error was in the lift plan and I managed to work out what was wrong so that was embarrassing but not disastrous. We dyed all the samples with Procion MX and one sample was untied. It was okay so I breathed a sigh.
Then I picked up Kirsten Froberg  on my way home past Swindon station and we spent a happy two days discussing weaving topics. She had an appointment with a robemaker in Pershore (just down the road from Malvern) on Monday so I drove her over and stayed to listen. Very interesting. If you have just been appointed Vice-Chancellor of University X, you order your robe from him. So the place is full of black velvet, red and yellow silk, ermine, hat moulds for tricornes and so on. Fabulous ribbon, heavy gold motifs - - indeed everything that a textile nerd finds attractive. Kerstin has a photo which I am hoping she will email to me.
If that was not enough, the robemaker took us into Pershore Abbey and showed us the embroidered copes and altar cloths which were stored away. Quite breath-taking.

It was raining hard so we went Beckford Silk Mill and looked around. Then home to steak and kidney pie. Today we walked on the Malvern Hills before she caught a train to Gatwick on her way home.

Posted with Blogsy

Dyeing Yarn

Two skeins dyed yesterday

Three balls of yarn injected with dye. These take impossibly long to dry so, wet or not, I wound them back into skeins yesterday and this morning they are dry.

And here they are. This evening I will turn them all into little skeins and finish off the boxes.

I went to the bookbinding class in the morning and have started on repairing three old dictionaries, doing them in parallel. Bookbinding is all about hanging about waiting so I need to have several things running in parallel. I reduced all three books to the textblock and removed the glue on their spines. Next week. I shall repair the pages which are not bad. One book needs nothing, one has something wrong with one section and the last has the front two pages in a real mess.

Robin arrived after the class and we spent the afternoon framing pictures. I stripped down an existing one, cleaned it up carefully and reassembled it. Then stripped down another one, threw away the picture (faded beyond belief) and cut a new mountboard for one of Michael's pictures. it was reassembled and both were hung. I use the downstairs toilet as a crammed gallery. A long time ago, I installed a museum style hanging system in there which makes it dead easy to change pictures around. So three works by me have been removed and will be disposed of.  Today I have two frames to make and another existing frame to deal with. These are much more important pictures and will be hung in the studio. Robin has equally busy although he got very cross. I have a cutter to make the bevelled inner edges in mountboards and he got the bevel round the wrong way on the same piece of board - twice. So he gave up and had a beer.

I am also hoping to clean up the room upstairs this morning. I can't even walk across the room at the moment.

Chelsea Physic Garden

Saturday was Kennet Valley Guild day and so it was busy, busy. Noone has lynched me yet - I can't think why. After that, I drove to Ruth's house  and watched while she and Robin tried doing one of the recipes (for sea bass) which we got at the Hibiscus day. It worked although it took two of them a lot of running around to produce four plates of fish. I am having a return match today as Robin is on his way here to frame a lot of pictures and I am going to do the pork recipe.

On Sunday we went into London and looked at the Antique Textile Fair in Chelsea Old Town Hall. Much more interesting than the one in Manchester in March. There was a French dealer there selling a small piece of quilting which was Indian 17th century and he wanted a lot of money for it. He also had a large piece of French flowered silk which was 18th century and even more expensive. Lots of lovely things. I bought an obi for £10.00. It is badly marked but it looks like mould and I think I might try to clean it.

Then we went round to the Chelsea Physic Garden and took a garden tour which was very good. It was a warm cloudless day, nore like summer than October.

Due to Robin's arrival, I cleaned up the studio yesterday and sorted out all the little skeins I have made up into boxes. These are for sale at the forthcoming Guild exhibition. The paper boxes were made by Chris Fletcher and are lovely - so much so that I don't want to write a price on them or indeed stick a label on. I was given some handspun wool to use in these boxes and, after sorting out what I had already, I decided what colours to dye the handspun - and got up at 6 am to do the dying. So it is coming up to 8 o'clock and the steaming just about finished!! I will post some pictures when the yarn is dry.

Bookbinding starts up today. I have three Victorian books from my son-in-law, Derek, to repair.

More Books Bound

Two books made using the same marbled paper. The right hand one has endpapers of the same marbled paper from Venice as the left hand one's cover. The picture of Venice on the right is by me!! These are fine but I am not sure about the one with mulberry bark paper. I have sewn it but the paper is very fragile and some sheets are very flimsy whereas a couple are much thicker and are okay. It is currently being pressed. Also the book does not have as many pages as I like. But what I do have cost me $50 in Samarkand.  I have to put the Atlas cloth onto paper for the cover which I hope to do today.

Last night as I was going to bed, I realised that I had not selected endpapers for the mulberry bark book so inspected the stash and did not like anything. So I thought of what was typical of Central Asia and the answer was roses. I hunted out all the photos I had taken of roses, chose these two and spent an hour creating this patterned paper which is very flamboyant and will scream at the cover. It will do nicely. The women in Samarkand did not bother much about matching colours - as long as it was loud, it was okay. The pink rose is from Samarkand. The bunch of red roses are from Cappadocia. Oh and I got to bed after midnight.

Cleaning Up

At last I have got to the end of paperwork so today I can do what I want - which is bookbinding. I have another textbook sewn and will finish that today and I have torn and folded the mulberry bark paper from Samarkand. This, being handmade, had deckled edges and I wanted to avoid a straight cut so I used a ruler set acros the centre of the sheet and passed a paintbrush loaded with water down the ruler's edge, then carefully tore the edge through the wet paper. It worked a treat and the edges match the original ones. I had to wait till the paper had dried before folding but the textblock is ready to be pressed now.

I have acquired several books in the last few days. The Midlands Region of the Society of Book-binders is having an internal competition to bind a Japanese book and is prepared to sell copies of the textblock to 'outsiders'. So I have bought two copies. It is properly done on very thin paper with two prints to each page. The pages will be folded and the fold goes at the fore edge. I fancy binding this and will have fun designing the covers. I still have not used some paper printed in gold and bought in Kyoto.  It is to have a box too. The Society itself is having a free-for-all in 2014, binding a book called ' Sweet Thames, Run Softly' by Robert Gibbins. It is illustrated with his own woodcuts which are lovely. The idea is that anyone who wants can bind a copy and enter it at the 2014 Conference. There is no judging. I am not a Book Designer and I am sure there will be superb designs on show but why not do what I can do, which will be to design as piece of fabric for the cover. I am sure there will lots bound in leather. That's is beyond me. The book itself is very good and I read it is two sittings.

The other book I have acquired is something I have wanted since 1981. I was ill that year and could not work for several months. I borrowed a very early copy of Ruskin's The Stones of Venice from Gloucester Library, three volumes bound in leather and worked my way through it. Over the years, I have looked at second hand copies but they were either abridged, missing the illustrations or too expensive. Yesterday at Aardvark Books, I asked if they had a copy and they produced two. One abridged and the other a Folio Society version of 2001 in a case - complete. I bought it for £20.00!!

I have been clearing out in what is known as the Fax room, although we have not had a Fax machine for several years. The shelves need to be taken down before the builder starts in on doing something about the damp in that room. The shelves on that side go to the ceiling and were Michael's province and I had no idea what was there. So after 2.5 years, I found all sorts of strange things. A whole lot of tools for making stringed instruments (I know a good home for them), stones for sharpening tools (I need them), innumerable fancy drills, far too many power extension leads, and more cable ties than I will ever use. Oh and lots of internet connections which will go to a good home. So the shelves look quite bare now and at least I know what is there. One day soon I must do the same to the cellar.  Another 2.5 years?