Friday 16 October 2009

More on Black Jack

I managed to replace every lurex thread with a blue dyed thread (Debbie Bliss) and it is weaving up nicely. Now there are six plastic film canisters  dangling at the back of the loom, weighting these new threads. I use the canisters weighted with glass marbles,  winding the spare yarn round the canister, then trapping the thread in between the body and the lid of the canister. I have only once had a problem with this method which occurred when I was using a fine wool lace weight yarn as warp. The lid of the canister just cut through the yarn. The advantage of this method is that it is easy to alter the weight by adding or subtracting marbles. The disadvantage, at the moment that I have used up my stock of marbles as weights on the warp-weighted loom.


The hemming at the start is visible. This is done according to the Nancy Walker method which  I learnt during her course on linen weaving at the Denver Convergence in 2004. Very effective since you don't put any tension on the weft threads, only on the warp ones.




A comment on the Debbie Bliss pure silk yarn which is sold for knitting. It is expensive but it takes acid dyes beautifully and weaves up well.  It has an attractive high lustre and does not pill or shed fluff. I use it sparingly and this blue was some I dyed when experimenting about a year ago. I have shoe boxes (all labelled) full of 10 gm skeins of experiments in dyeing and I like to use them up.

2 comments:

  1. It's always nice to meet another weaver who blogs!!!

    Sue

    ReplyDelete
  2. Hi Pat, your blog is a welcome find, I know you so some interesting weaving and look forward to learning more about your work.

    I have had to come up with a new way to weight warp threads for the pattern threads on my Henning Band Loom, which are treated as a second warp. I dug out some plastic Schacht shuttle bobbins, and my boyfriend has weighted them with a length of threaded steel through the centre of each, this can be secured with a nut on either end, then the steel shaft can be removed in order to wind yarn on with a bobbin winder. I haven't tested them out yet.

    ReplyDelete

Followers

Blog Archive

About Me

I am weaver and - -. I dye my yarns with acid dyes, I paint my warps, put fabric collages and stencils on my weaving. I have three looms, a 12 inch wide, 12 shaft Meyer for demos and courses, a 30 inch Louet Kombo which is nominally portable but has a stand, two extra beams and a home-made device containing a fan reed. And last a 32 shaft Louet Megado which is computer controlled, has a sectional warp and a second warp beam and I am the proud owner of an AVL warping wheel which I love to bits and started by drilling holes in. I inserted a device for putting a cross in. I have just acquired an inkle loom and had a lesson from an expert so I can watch TV and weave at the same time. I am interested in weaving with silk mostly 60/2 although I do quite a bit with 90/2 silk. I also count myself as a bookbinder with a special interest in Coptic binding.